The brand-new PN400 Phase Noise Test System is available for purchase! →

Create GPS Signal

Forums › VSG Series Discussions › Create GPS Signal

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #198516
    williamysko
    Participant

    Is it possible to create a GPS signal with VSG25A ?

    #198528
    Justin CrooksJustin Crooks
    Moderator

    Unfortunately, no. Due to the small pattern buffer, a test GPS signal cannot be generated.
    With our VSG60A (coming later this year), you can play very long patterns. If you have software that generates a GPS test signal, the VSG60A could play it.

    #229045
    DDRDDR
    Participant

    So, the VSG software from signal hound will not have preprogrammed GPS signal generation, right?

    #229062
    AndrewAndrew
    Moderator

    That is correct Dhivagar.

    #229069
    DDRDDR
    Participant

    Is this same for a Bluetooth signal also ?
    Can you suggest me which software is used to generate a test Bluetooth and gps signal ?

    #229104
    AndrewAndrew
    Moderator

    I am not familiar with software that can be used to generate these waveforms.

    Regards

    #233008
    DDRDDR
    Participant

    I found one video for this GPS generation application from keysight
    https://www.youtube.com/watch?v=2qv7vr8n_CQ

    Can we follow this same procedure with our VSG60A or else is there any possibilities to generate a GPS signal using Matlab and play with VSG60A?

    Also, the signal strength of GPS signals were very low upto -120dBm since our VSG cannot generate such low signals, how this is possible?

    #233021
    AndrewAndrew
    Moderator

    Dhivagar,

    I’m not familiar with GPS, but I believe the sample rate needed is 5MS/s or less, so I believe the VSG60A could generate a GPS signal if you used other software to generate the GPS waveform. We have no plans to create such a software at this time.

    Regards,
    Andrew

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.