Reply To: SA44B noise floor 50 ohm load

[Andrew]

Hi Cristian,

If I understand your question correctly, then yes, this is normal behavior. I will include two images of the setups of my working SA44B so you can compare.

I will sweep from 100k – 4.4Gz with 10k RBW at both reference level of 0 and again at -50.

Your results may not match exactly, but should be close.

Regards,
A.J.

• This reply was modified 10 years, 9 months ago by Andrew.

Attachments:

You must be logged in to view attached files.