The brand-new PN400 Phase Noise Test System is available for purchase! →

BB60C type1 and type2

Forums › BB Series Discussions › BB60C type1 and type2

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 10, 2021 at 10:54 pm #239908
    lsullivan
    Participant

    Dear Signal Hound,
    what is difference between BB60C type1 and type2 that is written in calibration pricing table? How do I know which one I have?
    best regards.

    November 11, 2021 at 10:31 am #239911
    AndrewAndrew
    Moderator

    The type 2 BB60C was a minor component change with no affect to the operation of the unit. You can determine if you have a BB60C-2 by connecting your unit to the PC and looking in the device manager under USB devices. It will show up as a “BB60C” for type 1 devices, and “BB60C-2” for type 2 devices.

    If you are still unsure, you can contact our service department at service@signalhound.com with your serial number and we can look up your unit.

    Andrew

    • This reply was modified 4 years, 10 months ago by AndrewAndrew.
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.