- This topic has 0 replies, 1 voice, and was last updated 10 months, 2 weeks ago by
.
Viewing 1 post (of 1 total)
- Posts
Hi,
Does Spike support manually entering lat/lon, as opposed to using an external GPS? I don’t immediately see an option for this.
The justification is for permanent monitoring sites that do not move, using a device like BB60C that does not have internal GPS. I would like to be able to manually enter the coordinates of my antenna and have that recorded in the .shr file.
Perhaps in the GPS control panel, under “GPS Type,” there could be an option for “Manual Entry,” and then three boxes appear to manually enter lat, lon, and height (AMSL).
I know I can post-process the .shr files to add this information, but that just adds an extra step.
73!
Andy
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
