The brand-new PN400 Phase Noise Test System is available for purchase! →

Multi-channel IQ Recording

Forums › BB Series Discussions › Multi-channel IQ Recording

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 1, 2022 at 9:57 pm #241694
    tlbui
    Participant

    Dear Andrew,

    Could you share with me example code of SignalHound’s existing IQ recorder?

    I try to create multi-channel IQ recording utilities.
    I could share with you once I finish it.

    Thank with regards,
    Tuong Lam

    July 5, 2022 at 9:00 am #241699
    AndrewAndrew
    Moderator

    Tuong,

    The I/Q recorder in Spike is not open source. That being said, we could look into extracting some useful code from the recorder as an example for customers to use. I will consider what this would look like.

    We have a much older open source recording utility that was written for the BB60A/C many years ago. It illustrates multi-threaded recording of full IF/IQ data. It will likely not compile against our current APIs, but it might be helpful for you.

    https://solutionspagedemo.kinsta.cloud/sigdownloads/BB60C/BB60_Demos.zip

    Andrew

    July 19, 2022 at 3:07 am #241746
    tlbui
    Participant

    Dear Andrew,

    Thank you!

    Regards,
    Tuong Lam

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.