The brand-new PN400 Phase Noise Test System is available for purchase! →

Phase noise Carrier Level – Reference Level Offset

Forums › General Discussions › Phase noise Carrier Level – Reference Level Offset

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 17, 2024 at 3:33 am #246023
    miranmiran
    Participant

    Hi!
    When measuring phase noise, I noticed that the attenuation value (in my case 10 dB) entered in Reference level offset for the signal Carrier Level was not taken into account. In Sweep mode was level correct. In phase noise measurment mode was Carrier Level 10 dB to low?
    Spike version: 3.9.7

    Thank You for the answer. Regards, Miran

    October 17, 2024 at 2:27 pm #246029
    AndrewAndrew
    Moderator

    Thank you for the bug report Miran. I believe this should be an easy fix.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.