The brand-new PN400 Phase Noise Test System is available for purchase! →

Problem with "Path loss Tables"

Forums › General Discussions › Problem with "Path loss Tables"

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2017 at 1:34 pm #146475
    Jean Pierre
    Participant

    Spike 3.1.6 , SA44B

    Hello

    When creating a file using the SPIKE editor, the trace shows the values entered, that’s fine.
    If I save the file, I no longer have access to the Spike commands, the trace is active, but the application is no longer accessible, it must be closed with the task manager of windows.
    The problem is the same on another computer.
    The “Path Loss Tables” file works well with application 3.18d.
    Thank you for your help.
    cordially

    February 23, 2017 at 2:27 pm #146485
    AndrewAndrew
    Moderator

    Hello Jean Pierre,

    After you save the file, I think the edit path loss dialog is still active and probably behind the spike window. This is preventing you from interfacing the Spike dialog.

    You can bring those to the front by finding them in the Windows toolbar along the bottom of the screen. The windows should be grouped with the Spike application.

    I apologize for the inconvenience. I will see if we can keep these on the top automatically in the next release.

    Regards,
    Andrew

    February 23, 2017 at 3:30 pm #146496
    Jean Pierre
    Participant

    Hello Andrew.
    Thank you very much, for the quick response, and especially the right answer.
    I’m stupid, I should have thought about it.
    I was convinced that the computer was blocked and not just Spike.
    The windows of the editor were well under the window of Spike
    Thanks again.
    cordially
    Jean Pierre

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.