The brand-new PN400 Phase Noise Test System is available for purchase! →

SA44B on Ubuntu

Forums › SA Series Discussions › SA44B on Ubuntu

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 28, 2024 at 7:10 am #245948
    clarkj
    Participant

    I installed Spike on Ubuntu 24.04 with no problems. When I connect my SA44B the driver is detected when I run: “lsbusb” no problem. However when I run Spike it does not detect the unit. I do have the “libusb-1.0-0” installed. I noticed the software was compiled on Ubuntu 18.04. Any ideas? Many thanks.
    Jeremy Clark VE3PKC

    September 30, 2024 at 8:46 am #245951
    AndrewAndrew
    Moderator

    Hi Jeremy,

    I responded to your email asking the same question. For others who might be reading, the SA44B is not supported on Linux, only Windows. For Linux support look to our BB60, SP145, or SM200/435 spectrum analyzers.

    October 8, 2024 at 7:49 pm #245985
    polpan
    Participant

    Hi Andrew,

    Is there any workaround, or like using Bottles or Wine?
    Have you made it work since it’s an .msi file?

    looking forward to support SA44B on Ubuntu.

    Thanks thanks

    October 9, 2024 at 8:37 am #245987
    AndrewAndrew
    Moderator

    I’m not aware of any workarounds, but maybe someone else will chime in.

    We have no plans to support the SA44B on Linux operating systems at this time.

    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.