The brand-new PN400 Phase Noise Test System is available for purchase! →

SP145 labview

Forums › SP Series Discussions › SP145 labview

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 27, 2025 at 6:16 pm #247336
    jequin
    Participant

    It appears that the SP145 is not supported in the current labview driver for signal hound. Is this correct? Are there plans for support in the future?

    April 29, 2025 at 10:00 am #247342
    AndrewAndrew
    Moderator

    Hi Jequin,

    We have not yet built a LabView wrapper project for the SP145 API. It should be possible. One approach I could suggest now is to look at the SM LabView project and adapt it to the SP API. This may be difficult if you don’t have experience calling DLLs from LabView.

    I don’t have a timeline on when we would have usable examples for the SP145 at this point.

    If you attempt to build your own, and have any questions, please contact us at support@signalhound.com.

    Thanks

    April 30, 2025 at 2:48 am #247347
    jequin
    Participant

    thx

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.