The brand-new PN400 Phase Noise Test System is available for purchase! →

Spike Manual Atten displaying wrong value

Forums › General Discussions › Spike Manual Atten displaying wrong value

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 16, 2015 at 8:32 am #69314
    hcglitte
    Participant

    Hi,

    I use the SA44B and SPIKE 3.0.18

    When choosing atten from 0 to 15 dB, the display window shows the double value. So, when I choose 15 dB, it states: Atten 30.

    Is this an error?

    HC

    November 16, 2015 at 8:58 am #69315
    AndrewAndrew
    Moderator

    Hi hcglitte,

    The correct value is what is chosen in the combo box. Thank you for bringing this to our attention. The value shown on the graticule is incorrect.

    Regards,
    A.J.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.