The brand-new PN400 Phase Noise Test System is available for purchase! →

Test DMR Standars

Forums › VSG Series Discussions › Test DMR Standars

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 29, 2020 at 10:20 am #237070
    rcidade
    Participant

    Dear Sir.

    Is there a possibility to test receivers of the DMR standard, where they work in 4FSK?
    I have a VSG25A, how to implement the bit pattern for testing this receivers?
    Thank you

    June 1, 2020 at 9:39 am #237078
    AndrewAndrew
    Moderator

    Hello rcidade,

    You will need some software to generate or receive protocol specific waveforms. We are not familiar with DMR standards.

    You might review some of our third party software vendors to see if they provide the functionality you require. I would start by looking at the Decodio software.
    https://solutionspagedemo.kinsta.cloud/support/third-party-software/

    Regards,
    Andrew

    June 1, 2020 at 11:47 am #237080
    rcidade
    Participant

    Dear Andrew.

    Ok, thankyou.

    Regards,

    Ronaldo

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.