The brand-new PN400 Phase Noise Test System is available for purchase! →

USB-TG44A Software support

Forums › TG Series Discussions › USB-TG44A Software support

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 28, 2015 at 12:19 am #33617
    yonatan
    Participant

    Hi,
    We recently purchased Tracking generator TG44A,
    I’m developing on c#.net platform and I’m looking for DLL file and code example to how to use it for building my application.
    My main gold is to control programmatically on the frequency and amplitude of the signal from my application.
    Thank you for your time,

    Yonatan Agronov| SW Developer | SCR Engineers Ltd. |18 Hamelacha St. Netanya, Israel POB 13564
    T: +972 (0)73 2466160 | F: +972 (0)73 2466139 | Email: Yonatanag@scrdairy.com

    April 28, 2015 at 2:29 pm #33744
    Justin CrooksJustin Crooks
    Moderator

    If you are using it with the USB-SA44B, you can use the API found in the Spike folder.
    If you are using it by itself, without the USB-SA44B, email support@signalhound.com for a standalone TG API. Keep in mind that the TG output power is only from -30 to -10 dBm.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.