The brand-new PN400 Phase Noise Test System is available for purchase! →

Use Raspberry PI 4 (ARM CPU)

Forums › BB Series Discussions › Use Raspberry PI 4 (ARM CPU)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 27, 2019 at 6:07 am #228072
    asvol
    Participant

    Hello.
    We have device BB60C Spectrum analzer and we want use it with Raspberry PI 4 with ARM CPU arhitecture. Can you build libbb_api.so and libftd2xx.so files for this platform.

    July 28, 2019 at 5:21 pm #228108
    AndrewAndrew
    Moderator

    Hello asvol,

    Unfortunately, the BB60C is not compatible with ARM architectures and cannot be easily ported. For the time being, our devices remain x86/x64 compatible only.

    Regards,
    Andrew

    July 29, 2019 at 11:22 pm #228151
    asvol
    Participant

    Thank for your answer. May be you can give us source code bb_api library. We can try to compile your library for ARM. Or maybe you can explain how to get raw IQ data from device throug ftdi without using your library. We use your device for fly on drones and we didn’t want use x86 compatible PC, because it’s too greedy for power.

    July 30, 2019 at 7:20 am #228160
    AndrewAndrew
    Moderator

    Our APIs are not open source. Additionally, the FTDI library is only used in the BB60 API for the tracking generation compatibility. The BB60C itself uses libusb for USB 3.0 communication. The BB60C has a complex and proprietary protocol that we do not publish.

    Regards,
    Andrew

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.