[davorin]

Maybe as an example….the first Picture Shows the end of the Transmission…so it triggered more than once…

And this Picture triggered correctly…

Attachments:

You must be logged in to view attached files.

[davorin]

Hello A.J (o;

Okay…thanks….talking about Trigger….
seems when I start the single cycle with Trigger activated, it doesn’t Trigger once if the Signal won’t fit into the sweep time…so many times I see only the end captured…

But I will try now anyway to record it and see if I can find a suitable Software for graphing the binary or CSV data…

[davorin]

Okay, thanks 🙂

So no danger when connecting it to DC causing some spikes to damage the input. Guess the attenuator is then needed for this.

[davorin]

Thanks for the great explanation 🙂

Still many RF stuff is new to me…..although I learned repairing radio/tv sets 30 years ago (o;

Will the Smith chart feature coming back to Spike software?

[davorin]

Ah right…the disconnects appeared as well on my Macbook….

Happened when VMWare wasn’t in the foreground….guess otherwise it can’t keep up with the USB data stream….

[davorin]

Hello A.J.

My intention is to use the SA44B locally with an Intel NUC i5 machine running Win8.1 Pro….so only occasionally I would take it with me with my Macbook…

Just wanted to note that behavior if it wasn’t detected upfront…

Tomorrow I will do some more testing with this great device….as I finally took it home to my lab where it belongs 😉

cheers
richard

[Author]

Posts