The brand-new PN400 Phase Noise Test System is available for purchase! →

JY

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 10, 2018 at 2:24 am in reply to: Signal Hound v2.15 says "Failed to create empty document" #157645
    JY
    Participant

    Hi Andrew,
    It works now after following your guide. Thanks! But v2.14 still exists same issue not solved. Anyway, I just use Spike from now.

    Meanwhile, our breach office also has one set USB-SA44B and encounters same problem. Can we use this bin file or need to provide the serial number of this machine to you for problem solved?

    Regards,
    JY

    January 7, 2018 at 4:51 am in reply to: Signal Hound v2.15 says "Failed to create empty document" #157632
    JY
    Participant

    Sorry! my the serial number of my USB-SA44B is “20540419”

    JY

    January 7, 2018 at 4:49 am in reply to: Signal Hound v2.15 says "Failed to create empty document" #157631
    JY
    Participant

    Hi A.J.
    I also encounter same issue to show “Failed to create empty document” in V2.14. But I also follow your guide to install Spike instead of V2.14. But get same result, the Spike pops up the Connection Status windows and its content is “Unable to connect to the internet or unable to fine the necessary file on the internet…..” I have checked USB-SA44B’s LED is green and my PC links internet well.

    PS: I installed v2.14 in our PC(Windows-XP SP3) and USB-SA44B worked well. Now I re-install Windows 7(32-Bit) in my same PC. But both v2.14 and Spike can’t work well.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)